Log in to ask questions, share your expertise, or stay connected to content you value. Don’t have a login? Learn how to become a member.
Bits and Bytes Articles on Automated WAN Solutions, from Network Engineers to Network Engineers.
Browse Posts
I want to deploy a VNF on a NFX. The network config is like this: ge-0/0/0 is trunk with 3 VLANs 2 VLANs goes to sxe-0/0/0 1 VLAN goes to sxe-0/0/1 No interface mapping, no SR-IOV The VNF has 2 productive interfaces (eth2 and eth3) If I start this VNF, the ovsbridge interfaces are down, ...
Hello, I wrote a filter for a constraint as follows set interfaces ae0 unit 0 family inet filter input closedaccess set firewall family inet filter closedaccess term access from source-address 192.168.1.2/32 set firewall family inet filter closedaccess term access then accept set ...
JUNOS Software Release [15.1X49-D211] JUNOS Software Release [15.1X49-D200.3] JUNOS Software Release [15.1X49-D170.4] JUNOS Software Release [15.1X49-D60.7] JUNOS Software Release [15.1X49-D120.3] JUNOS Software Release [15.1X49-D160.2] JUNOS Software Release [15.1X49-D70.3] ------------------------------ ...
Hi, I'm optimistic about AI's role as a positive force in pursuit of sustainability. We must manage the ramp in energy demands, but fortunately those actors with the infrastructure that are the current backbone of AI are the very actors leading decarbonization efforts--utilizing a high amount of renewables ...
Out of curiosity, what is the 15 version you're using? (I've got nothing; it's been a few years since I've had a firewall on 15, and don't recall a performance dip.) ------------------------------ Nikolay Semov ------------------------------
Thank you very much for your reply, Maitrya. I do agree that there may well be more than just static electrical characteristics that determine if a PSU combo is usable or not. I'm just curious as to why Juniper along with many other vendors cannot offer the compatibility in some product lines. We also ...
Somewhat randomly, but this works for sessions that are stuck and cannot be seen on in the "ps -aux" from shell, or the "show system users no-resolve" output from the CLI. I had a situation whereby the SSH connection wasn't active, however the device seemed to think a user was still logged in; fortunately ...
What does differentiate the ACX7024X from the ACX7024 devices? In this short article, we will explain the differences and the motivation behind the creation of this new router. Introduction We launched the ACX7024 in mid-2022, with the following characteristics: 1RU Ethernet router. Built for the aggregation of SFP ...
Using Juniper vSRX on hardware with constrained resources, typically a mini-PC serving as flexible Internet gateway. Those are lately very popular due to low footprint yet with capabilities making them suitable for running virtual machines. Introduction At very minimum, a mini-PC is tool for engineers to have x86 based SRX ( vSRX ) at home ...
PTX Express 5 ASIC has full support for SRv6 with up to 8 carrier segment identifiers (SIDs) in a packet. That translates to 48 micro-SIDs (uSIDs), enough to pass a packet around the world! Following is a description of how SRv6 was implemented in the ASIC. Introduction The large-sized headers and distinct processing steps associated with SRv6 ...
We’re all about connections, so make it easy for you to hop over to your favorite social channels.
Collaborate on Juniper projects with developers worldwide.
See more
Use pre-built topologies to explore our products and solutions—all for free.