ssg20-> get config
Total Config size 5307:
unset key protection enable
set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name "netscreen"
set admin password "nKVUM2rwMUzPcrkG5sWIHdCtqkAibn"
set admin auth web timeout 10
set admin auth dial-in timeout 3
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst
set zone "Untrust" block
unset zone "Untrust" tcp-rst
set zone "MGT" block
unset zone "V1-Trust" tcp-rst
unset zone "V1-Untrust" tcp-rst
set zone "DMZ" tcp-rst
unset zone "V1-DMZ" tcp-rst
unset zone "VLAN" tcp-rst
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "Trust"
set interface "ethernet0/2" zone "Trust"
set interface "ethernet0/3" zone "Trust"
set interface "bgroup0" zone "Null"
unset interface vlan1 ip
set interface ethernet0/0 ip x.x.x.x/32 [IP PUBLIC provider]
set interface ethernet0/0 route
set interface ethernet0/1 ip 192.168.1.1/24
set interface ethernet0/1 nat
set interface ethernet0/2 ip 192.168.2.1/24
set interface ethernet0/2 nat
set interface ethernet0/3 ip 192.168.3.1/24
set interface ethernet0/3 nat
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet0/0 ip manageable
set interface ethernet0/1 ip manageable
set interface ethernet0/2 ip manageable
set interface ethernet0/3 ip manageable
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set flow tcp-mss
set flow all-tcp-mss 1304
unset flow no-tcp-seq-check
set flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0
set ippool "global" 192.168.20.2 192.168.20.10
set user "ikeuser" uid 1
set user "ikeuser" ike-id fqdn "ikeuser" share-limit 25
set user "ikeuser" type ike l2tp
set user "ikeuser" remote ippool "global"
set user "ikeuser" password "zWWQ7YnONCpY6psK24CxAuYFMcnfCX2EvA=="
unset user "ikeuser" type auth
set user "ikeuser" "enable"
set user-group "ikegroup" id 1
set user-group "ikegroup" user "ikeuser"
set crypto-policy
exit
set ike gateway "ikegateway" dialup "ikegroup" Aggr outgoing-interface "ethernet
0/0" preshare "EmrO2ICTNt4dvOsNESCyQrEpgWnmi8i0Tg==" proposal "pre-g2-des-sha"
unset ike gateway "ikegateway" nat-traversal
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set vpn "ikephase2" gateway "ikegateway" no-replay transport idletime 0 proposal
 "nopfs-esp-des-md5"
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit
set l2tp default dns1 210.11.40.3
set l2tp default dns2 210.11.50.2
set l2tp default ippool "global"
set l2tp default ppp-auth chap
set l2tp "l2tunnel" id 1 outgoing-interface ethernet0/0 keepalive 60
set l2tp "l2tunnel" remote-setting ippool "global" dns1 y.y.y.a dns2 y.y.
y.b
set url protocol websense
exit
set policy id 2 from "Untrust" to "Trust"  "Dial-Up VPN" "192.168.1.0/24" "ANY"
tunnel vpn "ikephase2" id 0x1 l2tp "l2tunnel"
set policy id 2
exit
set policy id 1 from "Trust" to "Untrust"  "Any" "Any" "ANY" permit
set policy id 1
exit
set pppoe name "SPEEDY2"
set pppoe name "SPEEDY2" username "abcde@telkom.net" password "p4ssW0rD"
set pppoe name "SPEEDY2" idle 0
set pppoe name "SPEEDY2" interface ethernet0/0
set pppoe name "SPEEDY2" auto-connect 10
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
unset license-key auto-update
set telnet client enable
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit