set clock ntp
set clock timezone 11
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
exit
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 27911
set admin name "admin"
set admin password "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
set admin http redirect
set admin mail alert
set admin mail server-name "xxxxxxxxx"
set admin mail mail-addr1 "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
set admin auth timeout 10
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst 
set zone "Untrust" block 
unset zone "Untrust" tcp-rst 
set zone "MGT" block 
set zone "DMZ" tcp-rst 
set zone "VLAN" block 
unset zone "VLAN" tcp-rst 
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Trust"
set interface "ethernet0/1" zone "DMZ"
set interface "ethernet0/2" zone "Untrust"
set interface "ethernet0/3" zone "Null"
unset interface vlan1 ip
set interface ethernet0/0 ip 10.51.1.4/24
set interface ethernet0/0 nat
set interface ethernet0/2 ip xxx.xxx.224.226/29
set interface ethernet0/2 route
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet0/0 ip manageable
unset interface ethernet0/2 ip manageable
set interface vlan1 manage mtrace
unset flow no-tcp-seq-check
set flow tcp-syn-check
set domain oxygenforbusiness.com
set hostname NZAKLFWL001
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set dns host dns1 10.51.1.21 src-interface ethernet0/0
set dns host dns2 10.55.1.21 src-interface ethernet0/0
set dns host dns3 203.96.152.4 src-interface ethernet0/2
set dns host schedule 06:28
set address "Trust" "10.51.1.0/24" 10.51.1.0 255.255.255.0
set address "Trust" "MEL" 10.53.1.0 255.255.255.0
set address "Trust" "SYD" 10.52.1.0 255.255.255.0
set user "jamesb" uid 2
set user "jamesb" ike-id u-fqdn "xxxxxxxxxxxxxx@xxxxxxxxxxxxxx" share-limit 1
set user "jamesb" type  ike
set user "jamesb" "enable"
set ike gateway "ClientVPNGateway" dialup "jamesb" Aggr outgoing-interface "ethernet0/2" preshare "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" proposal "pre-g2-3des-sha"
unset ike gateway "ClientVPNGateway" nat-traversal
set ike respond-bad-spi 1
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set vpn "ClientVPN" gateway "ClientVPNGateway" replay tunnel idletime 0 proposal "g2-esp-3des-sha" 
set url protocol websense
exit
set vpn "ClientVPN" proxy-id local-ip 10.51.1.0/24 remote-ip 255.255.255.255/32 "ANY" 
set policy id 1 name "Test" from "Trust" to "Untrust"  "Any" "Any" "ANY" permit log 
set policy id 1
exit
set policy id 2 name "clientvpnpolicy" from "Untrust" to "Trust"  "Dial-Up VPN" "10.51.1.0/24" "ANY" tunnel vpn "ClientVPN" id 13 log 
set policy id 2
exit
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set config lock timeout 5
set ntp server "pool.ntp.org"
set ntp server src-interface "ethernet0/2"
set snmp location "Auckland"
set snmp contact "xxxxxxxxxx"
set snmp name "xxxxxxxxx"
set snmp port listen 161
set snmp port trap 162
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset add-default-route
set route 0.0.0.0/0 interface ethernet0/2 gateway xxx.xxx.224.225 preference 20
set route 10.52.1.0/24 interface ethernet0/0 gateway 10.51.1.1 preference 20
set route 10.53.1.0/24 interface ethernet0/0 gateway 10.51.1.1 preference 20
set route 10.55.1.0/24 interface ethernet0/0 gateway 10.51.1.1 preference 20
set route 10.58.1.0/24 interface ethernet0/0 gateway 10.51.1.1 preference 20
exit
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit