unset key protection enable
set clock ntp
set clock timezone 0
set vrouter trust-vr sharable
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
unset auto-route-export
set ignore-subnet-conflict
exit
set alg appleichat enable
unset alg appleichat re-assembly enable
set alg sctp enable
set auth-server "Local" id 0
set auth-server "Local" server-name "Local"
set auth default auth server "Local"
set auth radius accounting port 1646
set admin name *********
set admin password *********
set admin manager-ip *********
set admin manager-ip ********* 255.255.255.0
set admin manager-ip ********* 255.255.255.0
set admin manager-ip ********* 255.255.255.0
set admin manager-ip *********
set admin manager-ip ********* 255.255.255.248
set admin manager-ip ********* 255.255.255.248
set admin port 9000
set admin auth web timeout 20
set admin auth dial-in timeout 3
set admin auth server "Local"
set admin format dos
set zone "Trust" vrouter "trust-vr"
set zone "Untrust" vrouter "trust-vr"
set zone "DMZ" vrouter "trust-vr"
set zone "VLAN" vrouter "trust-vr"
set zone id 100 "MPLS"
set zone "Untrust-Tun" vrouter "trust-vr"
set zone "Trust" tcp-rst 
set zone "Untrust" block 
unset zone "Untrust" tcp-rst 
set zone "MGT" block 
unset zone "V1-Trust" tcp-rst 
unset zone "V1-Untrust" tcp-rst 
set zone "DMZ" tcp-rst 
unset zone "V1-DMZ" tcp-rst 
unset zone "VLAN" tcp-rst 
set zone "MPLS" tcp-rst 
set zone "Untrust" screen tear-drop
set zone "Untrust" screen syn-flood
set zone "Untrust" screen ping-death
set zone "Untrust" screen ip-filter-src
set zone "Untrust" screen land
set zone "V1-Untrust" screen tear-drop
set zone "V1-Untrust" screen syn-flood
set zone "V1-Untrust" screen ping-death
set zone "V1-Untrust" screen ip-filter-src
set zone "V1-Untrust" screen land
set interface "ethernet0/0" zone "Untrust"
set interface "ethernet0/1" zone "MPLS"
set interface "bgroup0" zone "Trust"
set interface "tunnel.1" zone "Untrust"
set interface "tunnel.2" zone "Untrust"
set interface bgroup0 port ethernet0/3
set interface bgroup0 port ethernet0/4
set interface bgroup0 port ethernet0/5
set interface bgroup0 port ethernet0/6
unset interface vlan1 ip
set interface ethernet0/0 ip 11.11.11.11/29
set interface ethernet0/0 route
set interface ethernet0/1 ip 192.168.20.1/29
set interface ethernet0/1 route
set interface tunnel.1 ip unnumbered interface ethernet0/0
set interface tunnel.2 ip unnumbered interface ethernet0/0
set interface tunnel.1 mtu 1476
unset interface vlan1 bypass-others-ipsec
unset interface vlan1 bypass-non-ip
set interface ethernet0/0 manage-ip *********
set interface ethernet0/1 manage-ip *********
unset interface ethernet0/0 ip manageable
set interface ethernet0/1 ip manageable
set interface ethernet0/0 manage ping
set interface ethernet0/0 manage ssh
set interface ethernet0/0 manage telnet
set interface ethernet0/0 manage snmp
set interface ethernet0/0 manage ssl
set interface ethernet0/0 manage web
set interface ethernet0/1 manage ping
set interface ethernet0/1 manage ssh
set interface ethernet0/1 manage telnet
set interface ethernet0/1 manage snmp
set interface ethernet0/1 manage ssl
set interface ethernet0/1 manage web
set interface "serial0/0" modem settings "USR" init "AT&F"
set interface "serial0/0" modem settings "USR" active
set interface "serial0/0" modem speed 115200
set interface "serial0/0" modem retry 3
set interface "serial0/0" modem interval 10
set interface "serial0/0" modem idle-time 10
set interface vlan1 disable
set flow tcp-mss
unset flow no-tcp-seq-check
set flow tcp-syn-check
unset flow tcp-syn-bit-check
set flow reverse-route clear-text prefer
set flow reverse-route tunnel always
set domain *********
set hostname FIREWALL
set pki authority default scep mode "auto"
set pki x509 default cert-path partial
set nsrp cluster id 1
set nsrp cluster name FW-CLSTR
set nsrp rto-mirror sync
set nsrp vsd-group id 0 priority 50
set nsrp vsd-group id 0 preempt
set nsrp interface ethernet0/0
set dns host dns1 *********
set dns host dns2 *********
set dns host dns3 *********
set address "Trust" *********
set address "Untrust" *********
set address "Untrust" *********
set address "Untrust" *********
set address "Untrust" "Remote Site LAN" 192.168.1.0 255.255.255.0
set group address *********
set group address *********
set group address *********
set group address *********
set group address *********
set crypto-policy
exit
set ike gateway "CISCO-ROUTER-PRI-GW" address 22.22.22.22 Main outgoing-interface "ethernet0/0" preshare ********** sec-level standard
set ike gateway "CISCO-ROUTER-SEC-GW" address 33.33.33.33 Main outgoing-interface "ethernet0/0" preshare ********** sec-level standard
set ike respond-bad-spi 1
set ike ikev2 ike-sa-soft-lifetime 60
unset ike ikeid-enumeration
unset ike dos-protection
unset ipsec access-session enable
set ipsec access-session maximum 5000
set ipsec access-session upper-threshold 0
set ipsec access-session lower-threshold 0
set ipsec access-session dead-p2-sa-timeout 0
unset ipsec access-session log-error
unset ipsec access-session info-exch-connected
unset ipsec access-session use-error-log
set vpn "VPN-PRI" gateway "CISCO-ROUTER-PRI-GW" no-replay tunnel idletime 0 sec-level standard
set vpn "VPN-PRI" monitor optimized rekey
set vpn "VPN-PRI" id 0x14 bind interface tunnel.2
set vpn "VPN-SEC" gateway "CISCO-ROUTER-SEC-GW" no-replay tunnel idletime 0 sec-level standard
set vpn "VPN-SEC" monitor optimized rekey
set vpn "VPN-SEC" id 0x15 bind interface tunnel.2
set url protocol websense
exit
set vpn "VPN-PRI" proxy-id local-addr "MPLS" "Any" remote-addr "Untrust" "Remote Site LAN" "ANY" 
set vpn "VPN-SEC" proxy-id local-addr "MPLS" "Any" remote-addr "Untrust" "Remote Site LAN" "ANY" 
set log session-init
exit
set policy id 3 from "MPLS" to "Untrust"  "Any" "Remote Site LAN" "ANY" permit log 
set policy id 3
set log session-init
exit
set policy id 4 from "Untrust" to "MPLS"  "Remote Site LAN" "Any" "ANY" permit log 
set policy id 4
set log session-init
exit
set policy id 5 from "MPLS" to "Untrust"  "Any" "Any" "ANY" deny log 
set policy id 5
set log session-init
exit
set policy id 6 from "Untrust" to "MPLS"  "Any" "Any" "ANY" deny log 
set policy id 6
set log session-init
exit
set log module system level emergency destination console
set log module system level alert destination console
set log module system level critical destination console
set log module system level error destination console
set log module system level warning destination console
set log module system level notification destination console
set log module system level information destination console
set nsmgmt bulkcli reboot-timeout 60
set ssh version v2
set ssh enable
set config lock timeout 5
unset license-key auto-update
set telnet client enable
set ntp server **********
set ntp interval 1440
set ntp "no-ha-sync"
set ntp max-adjustment 3600
set snmp community **********
set snmp port listen 161
set snmp port trap 162
set snmpv3 local-engine id "0162072013004103"
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
set protocol bgp 65489
set enable
set hold-time 30
set neighbor 192.168.20.2 remote-as 8426 local-ip 192.168.20.1/29 outgoing-interface ethernet0/1
set neighbor 192.168.20.2 enable
set neighbor 192.168.20.2 hold-time 30
set neighbor 192.168.20.3 remote-as 8426 local-ip 192.168.20.1/29 outgoing-interface ethernet0/1
set neighbor 192.168.20.3 enable
set neighbor 192.168.20.3 hold-time 30
unset ipv4 synchronization
set ipv4 neighbor 192.168.20.2 activate
set ipv4 neighbor 192.168.20.3 activate
exit
set access-list 1
set access-list 1 permit ip 192.168.1.0/24 5
set route-map name "FROM-MPLS-PRI" permit 10
set local-pref 200
exit
set route-map name "FROM-MPLS-SEC" permit 10
set local-pref 90
exit
set route-map name "REDST-STATIC" permit 5
set match ip 1
exit
unset add-default-route
set route 22.22.22.22/32 interface ethernet0/0 gateway 11.11.11.12
set route ********** interface ethernet0/0 gateway 11.11.11.12
set route ********** interface ethernet0/0 gateway 11.11.11.12
set route ********** interface ethernet0/0 gateway 11.11.11.12
set route 192.168.1.0/24 interface tunnel.1
set route 192.168.1.0/24 interface tunnel.2 preference 30
set protocol bgp
set redistribute route-map "REDST-STATIC" protocol static
exit
exit
set interface ethernet0/1 protocol bgp
set vrouter "untrust-vr"
exit
set vrouter "trust-vr"
exit