Application Acceleration
Reply
Contributor
Andre_Mostert
Posts: 21
Registered: ‎06-18-2008
0

Is there a way to clear out old QoS devices from the Hub device.

Hi there

I am looking for a way to do a cleanup of all the old devices in the QoS part and the rest of the Juniper HUB device. I have removed the devices with the list command but there are still references in QoS and Acceleration.

config reg-server delete-entry "ip address"
commit

Any suggestions

Andre
Recognized Expert
DannyJ
Posts: 319
Registered: ‎11-02-2007
0

Re: Is there a way to clear out old QoS devices from the Hub device.

Hi Andre,

 

I'm back....................

 

I've had the same issue you experince here and I have had to remove the config manually, I do it from the SSH session. Its just a mater of removing things in the correct sequence as you will obviously understand.

 

Danny Jump
Technical Marketing Manager - Access and Acceleration Business Unit
Contributor
Andre_Mostert
Posts: 21
Registered: ‎06-18-2008
0

Re: Is there a way to clear out old QoS devices from the Hub device.

Danny

 

So there is not a one command that removes all trace of the device? I will have to go and remove it per module... example - NSC then acceleration and then QoS?

 

Sweet let me give it a bash. Thanks for the quick response

 

Andre

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.