Community Talk

Welcome to J-Net!

by on ‎02-23-2009 12:31 PM - last edited on ‎09-18-2014 09:56 AM by Administrator Administrator

by msmithtechy on ‎02-28-2010 11:01 AM

Hi juniper experts, i am here catch up some juniper talents for my direct client opportunities in albany, NY its a long term contract the deadline for this position is 3rd march 2010, i would be really thankful to someone who help me fill this position the rate is open for a best talent. someone interested can always apply to and 973 741 6154.

by msmithtechy on ‎02-28-2010 11:05 AM

i totally have 3 position with same location and duration one for Juniper SME, Infomation security and LAN services consultant and third one is design and network support specialist respectively all these involves juniper skills.

contact 973 741 6154

by on ‎03-01-2010 11:46 AM

Hi msmithtechy


You may want to post these job opportunities on Juniper's official LinkedIn Group job board:




by bassono_t on ‎03-15-2010 11:56 AM

Hi all,


I just joined the forum,

I don't have Juniper equipements in my small network but I want to start stuying Juniper. I'll like to have advice on the way to go forward and also would like to know whether there's any  virtual solution I can use for practicing after reading.

Am already CISCO certified and do remain a dummy in JUNIPER :-)

Thanks for helping

by bobby on ‎03-15-2010 08:23 PM



Nice to be part of the community. We dont have much to do with Junos, but have a lot of Netscreens in our environment. Now have an SRX  and J4350 for evaluation. I hope to improve my experience with products from Juniper stable by exchange of information in the forum







by yogee95 on ‎09-03-2010 09:31 PM

Hi Guyzzzz,Good Morning Joined Jnet Forums Hope to have Good Xperience and learn lot of things from this Posts

by on ‎10-28-2010 12:57 PM

How do I measure the roud trip delay on CTB 2056?


Below are the steps i did.

1. Serial 0/0 route to internet port in the back of CTB

2. Route the internet port in the back of CTB (same in step 1) to Serial 0/1 and set Serial 0/1 to loop: to NET configuration

3. Connect FireBerd 8000 to serial 0/0 (DB25)

The result I got for round trip delay is 80ms.


Would you please confirm the result is correct or not? if not, how much delay I should expect from serial to ip to serial on same CTB?



by Administrator Administrator on ‎10-28-2010 01:07 PM



Please post your question in J-Net Forums so that you can get a response from the Community. This blog is specfically for News Posts.


Thank you!

by on ‎11-12-2010 08:15 AM

Hi everyone!


from now on i will be posting some comments and issues.


Regards from Bolivia!

by sanjeevch on ‎12-01-2010 02:22 AM



this is my first post in the learning of junos.. i m cisco certified. planning to go for juniper certification. well the main reason to join this forum is to learn / share knowledge. hope to get good support from all other forum members. considering myself a beginer in juniper, i m planning to start with Day one booklets... ..take care.





by frankruns on ‎12-01-2010 08:03 AM

Hello Everyone,

I am new  to the J-Net community and  currently learning how to set up and configure Juniper switches. Looking forward to learning as much as I can about Juniper switches and routers and also from this forum.

Thanks, Frank


by binumhaneef on ‎02-08-2011 08:28 PM

I am new to juniper forum, would like to ask some questions regarding routing between routers

by Administrator Administrator on ‎02-09-2011 09:31 AM



Please post your questions in the Routing Forum on J-Net at


Thank you!

by Srini183 on ‎04-19-2011 12:05 AM

I just joined the forum,

I have 2no Juniper equipements(ssg140) in my network  and  I want to know more knowlodge on the same.

by bashir on ‎06-30-2011 08:45 PM



I am happy to be a part of J-Net community.

About the Author
  • Douglas Richard Hanks Jr. is a Director of Product Management with Juniper Networks and focuses on solution architecture. He is certified with Juniper Networks as JNCIE-ENT #213 and JNCIE-SP #875. Douglas’ interests are network engineering and architecture for enterprise and service provider technologies. He is the author of the Juniper MX Series book by O'Reilly Media and several Day One books published by Juniper Networks Books. Douglas is also the co-founder of the Bay Area Juniper Users Group (BAJUG). Douglas can be reached on Twitter @douglashanksjr.
  • Hiroaki Kato is a Senior Director of Systems Engineering at Juniper Networks and is responsible for managing the Systems Engineering organization in Japan. Before he joined Juniper Networks, Kato served as Japan Country Manager for Red Bend Software. Kato was responsible for overall business operation of Red Bend Software Japan K.K and grew the business in Japan further in mobile and into other industries. Prior to Red Bend, he was with Avaya Japan Ltd. During his time at Avaya Japan, the roles he took include overall operation of Avaya Japan as its Representative Director, Director of Solutions and Engineering and number of other leadership roles in strategy creation and business development. He also spent time at Avaya’s headquarters in New Jersey, USA, working as strategy and operations prime for one of the Avaya’s business units as well as some leadership role for global sales operations organization. Prior to Avaya, he served as the Unit Manager of Telecommunication Infrastructure Business Unit of Mitsubishi Corporation’s Information Systems and Services Group, providing carrier grade telephony systems and associated support to major telecom carriers in Japan. He also served as a board member of MC Techno-Serve Ltd, a 100% subsidiary of Mitsubishi Corporation which provided post sales maintenance of the carrier grade telephony systems Mitsubishi Corporation sold. He holds a bachelor’s degree in Electrical Engineering from Tokyo University and EMOT at Massachusetts Institute of Technology.
  • Lisa Lorenzin is a Principal Solutions Architect with Juniper Networks, specializing in security and mobility solutions, and a contributing member of Trusted Network Connect, a work group of the Trusted Computing Group that defines an open architecture and standards for endpoint integrity and network security. She has worked in a variety of Internet-related roles since 1994, with more than a decade of that focused on network and information security, and is currently concentrating on enterprise security including network segmentation, end-to-end identity-based access control, and integration of mobile security.
  • Tony Ng is an APAC Demo coordinator with Juniper Networks and is responsible for maintaining inventory of lab equipment in Hong Kong, assist with PoC lab projects, and Demo loan shipment.
About Community Talk

News and announcements for the J-Net Community.

Subscribe to Community Talk  RSS Icon

Follow us on Twitter.

Copyright© 1999-2015 Juniper Networks, Inc. All rights reserved.