How do you actually configure the QSFP+ ports as network ports and not virtual chassis ports? I deleted ports 2 and 3 from the virtual chassis delete command and tried to configure them as 40 gig XLE ports but they're not showing up:
root@MBS-2-EDGE-4300> show virtual-chassis vc-port
fpc0:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
1/0 Configured 5 Up 40000 1 vcp-255/1/1
1/1 Configured 5 Up 40000 1 vcp-255/1/0
fpc1:
--------------------------------------------------------------------------
Interface Type Trunk Status Speed Neighbor
or ID (mbps) ID Interface
PIC / Port
1/0 Configured 5 Up 40000 0 vcp-255/1/1
1/1 Configured 5 Up 40000 0 vcp-255/1/0
1/3 Configured Absent
1/2 Configured Absent
{master:0}
root@MBS-2-EDGE-4300> show interfaces terse | match xle
{master:0}
root@MBS-2-EDGE-4300> ...rfaces | display set | match xle
set interfaces xle-0/1/2 description "TO-EX4300: XLE-0/1/2"
set interfaces xle-0/1/3 description "TO-EX4300: XLE-0/1/3"
set interfaces xle-1/1/2 description "TO-EX4300: XLE-1/1/2"
set interfaces xle-1/1/3 description "TO-EX4300: XLE-1/1/3"
{master:0}
root@MBS-2-EDGE-4300>