03-07-2012 07:36 PM
Can someone can tell me if we can use one VPLS with multiple VLAN using LDP-VPLS across MPLS? or method to do this design. Below is the topology..
CE1 (VLAN10,20,30)--->PE1 (VPLS100)----->MPLS Network--->PE2(VPLS100)---->CE2(VLAN10,20,30)
Please help me...Thanks
06-03-2012 07:13 PM
Hey there welcome to the forums. Here is what a link to the juniper support site with details for how to configure multiple vlans per vpls instance.
06-05-2012 07:29 AM
many thanks for the url given. But that method as i know if Juniper (PE) ---> Juniper (PE). Cannot use with other vendor such as Alacatel-Lucent because i tested it previously. Thanks again.