Ethernet Switching
Showing results for 
Search instead for 
Do you mean 
Posts: 14
Registered: ‎10-13-2010
0 Kudos

Cisco IOS to Junos COS issues

Dear all,


Does anyone have ideal for the translation between the following QoS to IOS


interface GigabitEthernet3/1
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan
 switchport mode trunk
 no ip address
 wrr-queue bandwidth percent 30 70 0
 wrr-queue queue-limit 40 30 30
 wrr-queue cos-map 1 1 1
 wrr-queue cos-map 1 2 0
 wrr-queue cos-map 2 1 2 3 4
 wrr-queue cos-map 2 2 6 7
 udld port
 mls qos trust dscp

Super Contributor
Posts: 158
Registered: ‎04-20-2009
0 Kudos

Re: Cisco IOS to Junos COS issues

It might be easier to translate if you can describe what you want to do.  There is not a good direct translation for your configuration snippet.


I.e.  I want to give ipprec 3 10% of the bandwidth. etc etc