Ethernet Switching
Reply
Contributor
annpat
Posts: 14
Registered: ‎10-13-2010
0

Cisco IOS to Junos COS issues

Dear all,

 

Does anyone have ideal for the translation between the following QoS to IOS

 

interface GigabitEthernet3/1
 switchport
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan
 switchport mode trunk
 no ip address
 wrr-queue bandwidth percent 30 70 0
 wrr-queue queue-limit 40 30 30
 wrr-queue cos-map 1 1 1
 wrr-queue cos-map 1 2 0
 wrr-queue cos-map 2 1 2 3 4
 wrr-queue cos-map 2 2 6 7
 udld port
 mls qos trust dscp
!

Super Contributor
jwparks
Posts: 158
Registered: ‎04-20-2009
0

Re: Cisco IOS to Junos COS issues

It might be easier to translate if you can describe what you want to do.  There is not a good direct translation for your configuration snippet.

 

I.e.  I want to give ipprec 3 10% of the bandwidth. etc etc

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.