Ethernet Switching
Reply
Contributor
daemon699
Posts: 17
Registered: ‎03-10-2011
0

CoS multifield classifier not working on EX2200 interface

Hello!

 

I'm trying to do classification on per-interface basis on EX2200. The config is something like this:

 

ge-0/0/2 {
    unit 0 {
        family ethernet-switching {
            vlan {
                members myvlan;
            }
            filter {
                input f1;
            }
        }
    }
}
family ethernet-switching {
    filter f1 {
        term 1 {
            then {
                forwarding-class c1;
                loss-priority low;
            }
        }
    }
}

It works on EX4200 but won't work on EX2200. I've tried junos 11.1 and 11.4 with the same result.

 

The following config also won't work:

class-of-service
interfaces {
    ge-0/0/2 {
        unit 0 {
            forwarding-class c1;
        }
    }
}

How can I do the task?

 

Distinguished Expert
dfex
Posts: 740
Registered: ‎04-17-2008
0

Re: CoS multifield classifier not working on EX2200 interface

Hi daemon699,

 

Unfortunately the CoS features on the EX2200 are a bit limited compared to the EX32/42/4500.  Per interface classifiers are not supported.

 

If you look at the feature guide for 11.4, it shows this and a few other CoS features that are unavailable:

 

http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/ex-series-software-fe...

 

The EX2200 only allows you to use BA classification for queuing.

 

Hope this helps. 

Ben Dale
JNCIP-ENT, JNCIS-SP, JNCIE-SEC #63
Juniper Ambassador
Follow me @labelswitcher
Contributor
daemon699
Posts: 17
Registered: ‎03-10-2011
0

Re: CoS multifield classifier not working on EX2200 interface

Thanks for reply, dfex! Though it's disappointing...

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.