I'm not sure if it's pertinent, but I noticed that the switch isn't getting ARP data for this vlan.
> show arp interface vlan.323
{master:0}
> show interfaces vlan.323
Logical interface vlan.323 (Index 85) (SNMP ifIndex 619)
Flags: Up SNMP-Traps 0x4000 Encapsulation: ENET2
Input packets : 0
Output packets: 50659
Protocol inet, MTU: 1500
Addresses, Flags: Is-Preferred Is-Primary
Destination: 11.111.162.168/29, Local: 11.111.162.169, Broadcast: 11.111.162.175
{master:0}
EDIT: Rather than using the bootp helper, we also tried using the DHCP relay stanza. That didn't work either. We tested this on a different port, vlan and pxe device.
# show forwarding-options dhcp-relay
overrides {
delete-binding-on-renegotiation;
}
server-group {
pxe {
11.111.162.15;
}
}
active-server-group pxe;
group all {
active-server-group pxe;
interface vlan.418;
}
> show dhcp relay statistics
Packets dropped:
Total 0
Messages received:
BOOTREQUEST 0
DHCPDECLINE 0
DHCPDISCOVER 0
DHCPINFORM 0
DHCPRELEASE 0
DHCPREQUEST 0
Messages sent:
BOOTREPLY 0
DHCPOFFER 0
DHCPACK 0
DHCPNAK 0
DHCPFORCERENEW 0