Ethernet Switching
Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
Contributor
Posts: 102
Registered: ‎02-07-2016
0 Kudos

EX2200C after upgrade to 15.1R5 license error

Experts,

 

I don't know if I should just ignore this message but this can't give me relaxing time when I see errors like this:

 

Jun 19 07:06:18 storeroom /kernel: Percentage memory available(18)less than threshold(20 %)- 1
2017-06-19	07:06:15	Auth	Info	IP	Jun 19 07:06:15 kitch_storeroom sshd[1296]: Accepted keyboard-interactive/pam for tech from 10.2.20.5 port 57926 ssh2
2017-06-19	06:59:58	Daemon	Error	IP	Jun 19 06:59:58 kitch_storeroom rpd[1192]: JTASK_SCHED_SLIP: 7 sec scheduler slip, user: 1 sec 599000 usec, system: 0 sec, 358374 usec
2017-06-19	06:58:17	System2	Notice	IP	Jun 19 06:58:17 kitch_storeroom xntpd: kernel time sync enabled 2001
2017-06-19	06:58:15	System2	Notice	IP	Jun 19 06:58:15 kitch_storeroom xntpd: kernel time sync disabled 2041
2017-06-19	06:58:14	Daemon	Error	IP	Jun 19 06:58:14 kitch_storeroom ppmd[1197]: ppmd_delete_cfm_pending_entries: connection received 0x39300c
2017-06-19	06:58:14	Daemon	Error	IP	Jun 19 06:58:14 kitch_storeroom ppmd[1197]: ppmd_delete_cfm_pending_entries: CFMD delete pending timer expired
2017-06-19	06:57:34	Daemon	Warning	IP	Jun 19 06:57:35 kitch_storeroom craftd[1186]: Major alarm cleared, FPC 0 PHY1 Temp Sensor Fail
2017-06-19	06:57:34	Daemon	Warning	IP	Jun 19 06:57:35 kitch_storeroom alarmd[1185]: Alarm cleared: FPC color=RED, class=CHASSIS, reason=FPC 0 PHY1 Temp Sensor Fail
2017-06-19	06:57:22	Daemon	Error	IP	Jun 19 06:57:22 kitch_storeroom dot1xd[1212]: JTASK_SNMP_CONN_RETRY: snmp_epi_reg_refresh: reattempting connection to SNMP agent (register MIBs): Operation timed out
2017-06-19	06:57:07	Daemon	Error	IP	Jun 19 06:57:07 kitch_storeroom dot1xd[1212]: JTASK_SNMP_CONN_RETRY: snmp_epi_reg_refresh: reattempting connection to SNMP agent (register MIBs): Operation timed out
2017-06-19	06:57:06	System2	Notice	IP	Jun 19 06:57:06 kitch_storeroom xntpd: kernel time sync disabled 6041
2017-06-19	06:57:06	System2	Notice	IP	Jun 19 06:57:06 kitch_storeroom xntpd[1189]: time reset +323469.898626 s
2017-06-19	06:57:04	Daemon	Error	IP	Jun 15 13:05:54 kitch_storeroom license-check[1214]: copy from member 0 failed
2017-06-19	06:57:04	Daemon	Error	IP	Jun 15 13:05:54 kitch_storeroom license-check[1214]: LIBJNX_REPLICATE_RCP_ERROR: rcp -r -Ji fpc0:/config/.license_priv/ /config/license : rcp: /config/.license_priv/: No such file or directory
2017-06-19	06:57:02	Daemon	Error	IP	Jun 15 13:05:52 kitch_storeroom license-check[1214]: LICENSE: copy to /config/license from fpc0:/config/.license_priv/
2017-06-19	06:56:56	Daemon	Error	IP	Jun 15 13:05:46 kitch_storeroom chassism[1172]: IFCM: no handler for command subtype 182
2017-06-19	06:56:56	Daemon	Error	IP	Jun 15 13:05:46 kitch_storeroom chassism[1172]: IFCM: no handler for command subtype 178
2017-06-19	06:56:56	Local4	Error	IP	Jun 15 13:05:46 kitch_storeroom fpc0 Error: VRF __master.anon__.5 in egress ACL
2017-06-19	06:56:56	Daemon	Alert	IP	Jun 15 13:05:46 kitch_storeroom eswd[1205]: Root bridge in context 0 changed from 61440:5c:45:27:df:93:81 to 4096:00:31:46:47:61:00
2017-06-19	06:56:56	Local4	Notice	IP	Jun 15 13:05:46 kitch_storeroom fpc0 pfe_pme_max 24
2017-06-19	06:51:11	Auth	Info	IP	Jun 19 06:51:11 kitch_storeroom init: chassis-control (PID 1185) terminate signal 15 sent
2017-06-19	06:51:11	Daemon	Notice	IP	Jun 19 06:51:11 kitch_storeroom sfid[1104]: JTASK_EXIT: Exit sfid[1104] version 15.1R5.5 built by builder on 2016-11-25 15:36:06 UTC, caller 0x17f898

LIBJNX_REPLICATE_RCP_ERROR: rcp -r -Ji fpc0:/config/.license_priv/ /config/license : rcp: /config/.license_priv/: No such file or directory

 

is this something reroius? 

 

Contributor
Posts: 102
Registered: ‎02-07-2016
0 Kudos

Re: EX2200C after upgrade to 15.1R5 license error

I used install --format with 15.1R5 as advised by Juniper 

 

also: 

 

Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boo
t/modules;/modules/peertypeLoading the CHMIC module
;/modules/ifpfe_drv;/modules/platform;/modules;
kld netpfe drv: ifpfed_chmic ifpfed_ethinterface ifpfed_eth.1 already present in
 the KLD 'kernel'!
kldload: can't load /modules/ifpfe_drv/ifpfed_eth.ko: Exec format error
 ifpfed_ml_cmn ifpfed_svcskld platform: ex_ifpfeLoading the EX-series platform N
ETPFE module
 if_vcpkld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere gr
at_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
 ipsec kldcryptosoft0: <software crypto> on motherboard
 kats kldkldload: can't load kats.ko: File exists
IPsec: Initialized Security Association Processing.
.
Doing additional network setup:.
Starting final network daemons:.
Starting final network daemons:.

Is there any way to fix these? Then why they are advising such installation type if that simply does not work 

Visitor
Posts: 8
Registered: ‎08-04-2016
0 Kudos

Re: EX2200C after upgrade to 15.1R5 license error

Hi,

 

Have you already done the steps mentioned in the below KB article?

 

https://kb.juniper.net/InfoCenter/index?page=content&id=KB18951&act=login