Ethernet Switching
Reply
Visitor
Dunksalot
Posts: 4
Registered: ‎07-15-2011
0

EX3200 Implementing QoS

I have a 60-node network where I am supporting several customers.  Some run VoIP and some do not.  I run each customer on a separate VLAN on a dedicated port ont he EX3200 switch.

 

How do I implement QoS so that all customers' traffic gets prioritized for voice?  I am trying to set a global parameter rather than configure at the port level of each switch.

 

Last note...prefer to be done using jweb.  Thanks in advance!

Recognized Expert
sfouant
Posts: 190
Registered: ‎11-28-2007
0

Re: EX3200 Implementing QoS

To answer this would take many, many pages of text as QoS is one of the more advanced topics in Junos. In the meantime there is an excellent white paper which covers the subject matter, specifically focused on enabling class of service the EX device - http://www.juniper.net/us/en/local/pdf/implementation-guides/8010073-en.pdf

HTHs.
Stefan Fouant
JNCIE-SEC, JNCIE-SP, JNCIE-ENT, JNCI
Technical Trainer, Juniper Networks

Follow us on Twitter @JuniperEducate

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.