Ethernet Switching
Reply
Trusted Contributor
Luca
Posts: 324
Registered: ‎06-11-2009
0

EX3300 - disable VCP?

So i connected two EX3300s today using the SFP ports.  I connected port 2 on one  to port 2 on the other and to my suprise they formed a virtual chassis.

 

I don't want them in VC mode....  It seems that SFP ports 2 and 3 and configured for VCP mode by default... how can i disable this and use them as normal fibre uplniks?

 

Thanks,

 

Distinguished Expert
MMcD
Posts: 628
Registered: ‎07-20-2010
0

Re: EX3300 - disable VCP?

This may be what you are looking for:

 

http://www.juniper.net/techpubs/en_US/junos/topics/task/configuration/virtual-chassis-ex4200-fast-fa...

MMcD [JNCIP-SEC, JNCIS-ENT, CCNA, MCP]
____________________________________________________

[Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too]
Recognized Expert
ronf
Posts: 227
Registered: ‎04-04-2011
0

Re: EX3300 - disable VCP?

You should be able to change thse port settings with the following:

 

request virtual-chassis vc-port delete pic-slot 1 port 2

request virtual-chassis vc-port delete pic-slot 1 port 3

 

on each member.

 

Ron

JNCIE-SEC #127
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.