Ethernet Switching
Reply
Trusted Contributor
Samuel
Posts: 83
Registered: ‎11-15-2007
0

EX4200 - LACP - system-id

Hi,

 

I would like to configure system-id on a EX4200 virtual-chassis but I get this error:

 

{master:0}[edit interfaces ae0 aggregated-ether-options]
Samuel@TEST# commit
[edit interfaces ae0 aggregated-ether-options lacp system-id]
  'system-id 00:00:11:11:22:22'
    MC-AE must be configured for system-id
error: commit failed: (statements constraint check failed)

 

Do you know how to configure it?

 

Regards,
Samuel

Contributor
robert.juric
Posts: 62
Registered: ‎08-09-2010
0

Re: EX4200 - LACP - system-id

I'm not sure why, but it's wanting you to define a multichassis lag.

 

http://www.juniper.net/techpubs/en_US/junos10.1/information-products/topic-collections/config-guide-...

 

 

Trusted Contributor
Samuel
Posts: 83
Registered: ‎11-15-2007
0

Re: EX4200 - LACP - system-id

Thanks Robert. Unfortunetly this kind of statements are not supported on EX4200.

 

Regards,
Samuel

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.