Switching

last person joined: 17 hours ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

  • 1.  EX4200 generates power supply alarms.

    Posted 05-21-2013 06:29

    Hi, Guys

     

    On my EX4200 running version 12.3R2.5 is seeing following messages below in logging. The environment is OK and no alarm is active. JATC said it is a bug. I just wonder that it is harmless messages.

     

    May 20 04:37:22  SW02 chassisd[1310]: CHASSISD_SNMP_TRAP6: SNMP trap generated: Power Supply Removed (jnxContentsContainerIndex 2, jnxContentsL1Index 2, jnxContentsL2Index 3, jnxContentsL3Index 0, jnxContentsDescr Power Supply: Power Supply 2 @ 1/2/*, jnxOperatingState/Temp 1)
    May 20 04:37:22  SW02 chassisd[1310]: CHASSISD_SNMP_TRAP6: SNMP trap generated: Power Supply Removed (jnxContentsContainerIndex 2, jnxContentsL1Index 2, jnxContentsL2Index 4, jnxContentsL3Index 0, jnxContentsDescr Power Supply: Power Supply 3 @ 1/3/*, jnxOperatingState/Temp 1)
    May 20 04:37:22  SW02 chassisd[1310]: CHASSISD_SNMP_TRAP6: SNMP trap generated: Power Supply Removed (jnxContentsContainerIndex 2, jnxContentsL1Index 2, jnxContentsL2Index 5, jnxContentsL3Index 0, jnxContentsDescr Power Supply: Power Supply 4 @ 1/4/*, jnxOperatingState/Temp 1)
    May 20 05:37:22  SW02 chassisd[1310]: CHASSISD_SNMP_TRAP6: SNMP trap generated: Power Supply Removed (jnxContentsContainerIndex 2, jnxContentsL1Index 1, jnxContentsL2Index 3, jnxContentsL3Index 0, jnxContentsDescr Power Supply: Power Supply 2 @ 0/2/*, jnxOperatingState/Temp 1)
    May 20 05:37:22  SW02 chassisd[1310]: CHASSISD_SNMP_TRAP6: SNMP trap generated: Power Supply Removed (jnxContentsContainerIndex 2, jnxContentsL1Index 1, jnxContentsL2Index 4, jnxContentsL3Index 0, jnxContentsDescr Power Supply: Power Supply 3 @ 0/3/*, jnxOperatingState/Temp 1)



  • 2.  RE: EX4200 generates power supply alarms.
    Best Answer

    Posted 05-23-2013 20:59

    Yes - this is a bug, word is it will be corrected in 12.3R3 when it is released.



  • 3.  RE: EX4200 generates power supply alarms.

    Posted 06-20-2013 07:49

    Hi,

     

    This should be a bug.

    Did you just follow the Recommended JTAC release?

     

    EX4200 Junos 11.4R5.7 Standard 28 January 2013


  • 4.  RE: EX4200 generates power supply alarms.

    Posted 06-25-2013 15:58

    The JTAC recommended release doesn't support auto-snapshot and Nonstop Software Upgrade though, which is why I've upgraded - these seem like worthwhile features to move for.

     

    It looks like this bug has now been rectified in 12.3R3 - see below in the release notes under Infrastructure

     

    http://www.juniper.net/techpubs/en_US/junos12.3/information-products/topic-collections/release-notes/12.3/topic-69602.html#jd0e4325