First time poster, hope I've got the right forum for this.
I've got SSH access to a QFX 5100. I'm following a knowledge centre article on how to enable the web management interface but I don't appear to have the same option available.
The article suggests using the following:
# set system services web-management http
I get an error on tab complete for web-management:
# set system services we
^
syntax error.
If I list the available options I get:
# set system services ?
Possible completions:
<[Enter]> Execute this command
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
> database-replication Database replication configuration
> dhcp-local-server Dynamic Host Configuration Protocol server configuration
> finger Allow finger requests from remote systems
> ftp Allow FTP file transfers
> netconf Allow NETCONF connections
> outbound-ssh Initiate outbound SSH connection
> resource-monitor Resource monitor configuration
> service-deployment Configuration for Service Deployment (SDXD) management application
> ssh Allow ssh access
> subscriber-management Subscriber management configuration
> telnet Allow telnet login
> tftp-server Allow TFTP file transfers in default routing instance
> xnm-clear-text Allow clear text-based JUNOScript connections
> xnm-ssl Allow SSL-based JUNOScript connections
| Pipe through a command
Any suggestions as to what I'm doing wrong here?
For reference this is the JUNOS version:
JUNOS 13.2X51-D30.4 built 2014-11-27 11:45:49 UTC
Thanks for your help.