Ethernet Switching
Reply
Visitor
rade5
Posts: 2
Registered: ‎02-17-2012
0

Hosts unable to receive address via dhcp

I have an issue whereby some hosts are able to obtain addresses and others can't. All my hosts are on VLAN.1 at the moment. My config is attached


 

Pls assist.

 

Thkx

Trusted Contributor
dscott
Posts: 122
Registered: ‎03-17-2011
0

Re: Hosts unable to receive address via dhcp

If you move the hosts that don't pick up an IP from DHCP to a new port does it work?

Dustin

VCP-4/5, JNCIS-SEC, JNCIP-ENT
Recognized Expert
ronf
Posts: 251
Registered: ‎04-04-2011
0

Re: Hosts unable to receive address via dhcp

Your config looks like it should work fine.  Is it possible that there is so much traffic on a link that you are seeing storm-control drop the DHCP (broadcast) traffic?  I might also try a newer release of the 10.4 code train.  Current software is 10.4R9, and it appears you are still running 10.4R1.9.  Note that the upgrade from 10.4 pre R2 to something after R2 requires a boot-loader upgrade as well.

 

Ron

JNCIE-SEC #127
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.