Ethernet Switching
Reply
Visitor
Shailender
Posts: 6
Registered: ‎12-22-2007
0

How to configure 2 EX3200 switches

Hi,

 

WE are having 2 Ex3200 series switch, Please send me a sample configuration which make communication between them,

Such as Cisco VTP domain, so that all information travel from one switch to another.

Distinguished Expert
firewall72
Posts: 825
Registered: ‎05-04-2008

Re: How to configure 2 EX3200 switches

Hi,

 

I would recommend revieiwing the documentation for your JUNOS version (see below).  With regards to VTP, I beleive GRVP doesn't support VLAN database sharing yet.  We recently had to manualy add all our VLAN's to each switch.  There are some shortcuts, but you can't simply add a domain like Cisco's VTP.

 

http://www.juniper.net/techpubs/en_US/release-independent/junos/information-products/pathway-pages/ex-series/product/

 

-John

John Judge
JNCIS-SEC, JNCIS-ENT,

If this solves your problem, please mark this post as "Accepted Solution". Kudos are appreciated.
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.