Ethernet Switching
Reply
Regular Visitor
kang_ki-yong
Posts: 7
Registered: ‎01-04-2010
0

In EX-2200 Switch, BFD funtion not support?

In EX-2200 Switch, BFD funtion not support?

it's not displayed bfd command as below;

 

root# set routing-options static route 0.0.0.0/0 ?
Possible completions:
  active               Remove inactive route from forwarding table
+ apply-groups         Groups from which to inherit configuration data
+ apply-groups-except  Don't inherit configuration data from these groups
> as-path              Autonomous system path
> color                Color (preference) value
> color2               Color (preference) value 2
+ community            BGP community identifier
  discard              Drop packets to destination; send no ICMP unreachables
  install              Install route into forwarding table
> metric               Metric value
> metric2              Metric value 2
> metric3              Metric value 3
> metric4              Metric value 4
+ next-hop             Next hop to destination
  no-install           Don't install route into forwarding table
  no-readvertise       Don't mark route as eligible to be readvertised
  no-resolve           Don't allow resolution of indirectly connected next hops
  no-retain            Don't always keep route in forwarding table
  passive              Retain inactive route in forwarding table
> preference           Preference value
> preference2          Preference value 2
> qualified-next-hop   Next hop with qualifiers
  readvertise          Mark route as eligible to be readvertised
  receive              Install a receive route for the destination
  reject               Drop packets to destination; send ICMP unreachables
  resolve              Allow resolution of indirectly connected next hops
  retain               Always keep route in forwarding table
> tag                  Tag string
> tag2                 Tag string 2

 

Thanks ~~

Regular Visitor
kang_ki-yong
Posts: 7
Registered: ‎01-04-2010
0

Re: In EX-2200 Switch, BFD funtion not support?

[ Edited ]

Just answer my own question.

http://www.netscreen.at/techpubs/en_US/junos/topics/concept/ex-series-software-features-overview.htm...

 BFD function not supported. then, Have a roadmap?

Distinguished Expert
mikep
Posts: 483
Registered: ‎06-30-2009
0

Re: In EX-2200 Switch, BFD funtion not support?

Hi,

 

yes we have a roadmap but BFD on EX2200 is not commited to any release yet.

 

Kind Regards

Michael Pergment

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.