09-07-2008 10:44 PM
Hi, This is my first post on this forum and forgive me if the question has been posted before. Is the hardware specs such as weight, size, power, etc do exist for the following parts EX Uplink modules, SFP module, & PSU do exists?
I've been searching the website for hours now and I couldn't find any. I need the information because I am proposing the EX series to be put on a large ship. I also need the heat detailas for EX3200 & 4200 for HVAC computation.
Any help will be appreciated.
09-07-2008 11:52 PM
GbE port density per system
24P/24T: 24 (24 host ports or 20 host ports + four-port GbE uplink module)
48P/48T: 48 (48 host ports or 44 host ports + four-port GbE uplink module)
There are three models of power supply units, to support the different EX 3200 and EX 4200, provide electrical current to the chassis and devices connected to PoE ports on the chassis. The table below describes the three PSU models (320W, 600W and 930W) and the supported EX platforms. The platforms are divided into 4 categories - by PoE support - platform with no PoE ports, partial PoE capability (8 PoE ports) and full PoE capability (all 24 or 48 ports).
Note: The PSU models are not interchangeable.
please also find enclosed pdf file for more information
hope it helps
09-11-2008 04:23 PM
EX-Series switches Heat Dissipation . This info was sourced from Juniper
The heat dissipation for EX switches is in the following table.
EX 3200-24T(no PoE) 323.55
EX-3200-24T (8 PoE ports) 392.00
EX 3200-24P (24 PoE ports) 631.41
EX 3200-48T (no POE) 508.54
EX-3200-48T (8 PoE ports) 576.99
EX 3200-48P (48 PoE ports) 1061.44
EX 4200-24T (no PoE) 389.76
EX 4200-24T (8 PoE ports) 458.22
EX 4200-24P (24 PoE ports) 709.90
EX 4200-48T (No PoE) 591.81
EX 4200-48T (8 PoE ports) 660.26
EX 4200-48P (48 PoE ports) 1126.29