Ethernet Switching
Reply
Visitor
SILVER23
Posts: 1
Registered: ‎04-17-2012
0

VR and VRF

Hello!

 

I would like to know VRF's configration.

 

Because the throughput between VR0 and VR1 is very low in VR. 

 

This is a VR's config. When I config VRF, what config needs?

 

[config]

set interfaces ge-0/0/0 unit 0 family inet address 10.10.10.1/24
set interfaces ge-0/0/1 unit 0 family inet address 1.1.1.1/24
set policy-options policy-statement import-vr0 term t1 from instance vr0
set policy-options policy-statement import-vr0 from route-filter 10.10.10.0/24 exact
set policy-options policy-statement import-vr1_2_3 term t1 from instance vr1
set policy-options policy-statement import-vr1_2_3 term t2 from instance vr2
set policy-options policy-statement import-vr1_2_3 term t3 from instance vr3
set routing-instances vr0 instance-type virtual-router
set routing-instances vr0 interface ge-0/0/0.0
set routing-instances vr0 routing-options instance-import import-vr1
set routing-instances vr1 instance-type virtual-router
set routing-instances vr1 interface ge-0/0/1.0
set routing-instances vr1 routing-options instance-import import-vr0

 

Thanks&Regards

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.