Switching

Hi all,

My EX9208 using junos ver 12.3R2. I'm try configure vlan gateway using old method but when i using command show interface vlan terse output as per below:

{master}[edit]
root@CSW01# run show interfaces vlan.62
error: device vlan not found

root@CSW01# run show vlans

Routing instance        VLAN name             Tag         Interfaces
default-switch          IP_MGT                   123
                                                             xe-1/0/0.0
default-switch          JAB.JURU_AWAM_SALIRAN    65
                                                             xe-1/0/0.0
default-switch          JAB.PENG_SUMBER_MANUSIA  61
                                                             xe-1/0/0.0
default-switch          JAB.PRCGN_FIZIKAL        63
                                                             xe-1/0/0.0
default-switch          JAB.PRCGN_INFRASTRUKTUR  64
                                                             xe-1/0/0.0
default-switch          JAB.PRNCGN_EKON_PLRSN_PMBGN 67
                                                             xe-1/0/0.0
default-switch          JAB.TEKN_KOMUNIKASI      62
                                                             xe-1/0/0.0
default-switch          TKP.PRNCGN               66
                                                             xe-1/0/0.0

Is it EX9208 must use IRB style such as MX to make vlan gateway? Thanks and appreciate someoen feedback

it might be a bug, I think you should consult to jtac.

Hi,

I'm still dont want to open JTAC. Is it have someone facing the similar thing with me? 

Thanks and hope someone can verify it.

You need to configure it as an IRB like you would on an MX. The EX92xx use ELS there is a config convertor that you can use to convert configs from 'old' EX to 'new' EX 🙂

ELS Translator

Hi Mike,

Many2 thanks for your feedback and confirmation.

Dont know whay juniper dont do standardize command using product version. EX product but suddenly use MX style....

thanks again mike..