Ethernet Switching
Reply
Trusted Contributor
SapphireNET
Posts: 154
Registered: ‎03-27-2008
0

ex3200 10.0S1.1 possible crash

I have setup an interface ranhe on a ex3200-24T with a 4port GE module installed.

 

interface-range <name> {

   members ge-0/*/*;

}

 

protocols vstp{

  vlan X{

      interface-range <name> {

        bpdu-block-on-edge;

        no-root-port;

    }

  }

}

 

the 4 port module is used for uplink.

 

did a commit and the switch went away, is at a remote site so need to travel to recover.

 

the local end shows the fibre link is down!!

 

anybody else seen this type of issue?

JNCIS-M, JNCIS-SEC
Trusted Expert
SSHSSH
Posts: 601
Registered: ‎11-21-2009
0

Re: ex3200 10.0S1.1 possible crash

since it is at a remote site ,  use  " commit confirmed " next times

Trusted Contributor
SapphireNET
Posts: 154
Registered: ‎03-27-2008
0

Re: ex3200 10.0S1.1 possible crash

yeah thanks for the helpful hint :-)

JNCIS-M, JNCIS-SEC
Trusted Contributor
BuckWeet
Posts: 159
Registered: ‎08-29-2008
0

Re: ex3200 10.0S1.1 possible crash

Please gather any logs that you can and open a JTAC case.. Posting to a forum won't get the issue resolved unless we notify JTAC..

 

I'm experiencing sooo many bugs with JUNOS lately and I'm rather irritated.. They're missing little things commonly.

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.