Ethernet Switching
Reply
Hic
Contributor
Hic
Posts: 12
Registered: ‎12-01-2008
0
Accepted Solution

interface vlan down on VC

Hi all,


We have two 4200  switches in VC, the VC was managed via the vme interface, now we want to do in-band mangement via the interface vlan ADMIN (vlan-id 10). The problam is that the interface vlan.10 is  down while the vlan one is up, could you help :

root@BW-01>show interfaces terse

.............
ge-0/0/1               up    up 
ge-0/0/1.0             up    up   eth-switch
...............
vlan                    up    up
vlan.10                 up    down inet     192.168.101.13/24
vme                     up    down
vme.0                   up    down inet     192.168.100.12/24

Interface and Vlans configuration:


interfaces {
   ge-0/0/0 {
        unit 0 {
            family ethernet-switching {
        vlan {
            members ADMIN;
        }
        }
        }
    }
    ge-0/0/1 {
        unit 0 {
            family ethernet-switching {
        vlan {
            members ADMIN;
        }
        }
        }
    }
    ge-0/0/3 {
        unit 0 {
            family ethernet-switching {
        vlan {
            members ADMIN;
        }
        }
        }
    }

...........

   ge-1/0/0 {
        unit 0 {
            family ethernet-switching {
        vlan {
            members ADMIN;
        }
        }
        }
    }
    ge-1/0/1 {
        unit 0 {
            family ethernet-switching {
        vlan {
            members ADMIN;
        }
        }
        }
    }
    ge-1/0/3 {
        unit 0 {
            family ethernet-switching {
        vlan {
            members ADMIN;
        }
        }
        }
    }
.............
    vlan {
        unit 10 {
 
            family inet {
 
                address 192.168.101.13/24;
 
            }
 
        }
 
    }
 
    vme {
 
        unit 0 {
 
            family inet {
 
                address 192.168.100.12/24;

            }

        }
 
    }
  
}

routing-options {

    static {
       route 0.0.0.0/0 next-hop 192.168.100.1;
     }
  }

.......

vlans {
    ADMIN {
        vlan-id 10;
    }
  }


thank you,

Distinguished Expert
mikep
Posts: 483
Registered: ‎06-30-2009
0

Re: interface vlan down on VC

Hi,

 

"set vlan ADMIN l3-interface vlan.10" should solve your problem.

 

Kind Regards

Michael Pergament

 

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it. 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.