Switching

last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

  • 1.  show log messages output

    Posted 06-23-2016 10:14

    Hello

     

    Please share the possible reasons of generating these log messages in EX4200 sswitch

     

    > jdhcpd: DH_SVC_SENDMSG_FAILURE: sendmsg() from 10.170.11.2 to port 67 at 10.26.101.200 via interface 71 and routing instance default failed: No route to host

    > jdhcpd: DH_SVC_SENDMSG_FAILURE: sendmsg() from 10.170.11.2 to port 67 at 10.26.101.201 via interface 71 and routing instance default failed: No route to host

     

     

    Thanks in advance!!



  • 2.  RE: show log messages output
    Best Answer

    Posted 06-23-2016 10:47

     

    Can you keep DHCP configuration in the "Default" Routing instance and moved all other traffic with a firewall rule into the "Client" Routing instance. 

     

    May be see below link for a solution on ex4200 as well. Here its on srx.

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB21169&cat=ADDRESSING_NAT&actp=LIST.&smlogin=true