I want to set up portfast (spanning-tree) on an EX4200. I know how to do it with Cisco, but it seems less simple on EX4200
On Cisco the configuration is :
interface GigabitEthernet 7
switchport
switchport trunk encapsulation dot1q
switchport trunk native vlan 100
switchport mode trunk
spanning-tree portfast
no ip address
On EX4200 I have did this :
ge-0/0/3 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members vlan-200;
}
native-vlan-id 100;
}
}
}
How can I add spanning-tree portfast on the EX4200 ?
Thx