Identity and Policy Control
Reply
Contributor
Kamran
Posts: 45
Registered: ‎07-01-2008
0
Accepted Solution

000 configuration for 802.1x

hi to all scenario is that i have to configure IC4000 with 802.1x standard, also want to know how to configure odessye client and how to check OAC client configuration. i need step by step guide.
Trusted Contributor
ManojReddy
Posts: 38
Registered: ‎03-18-2008
0

Re: 000 configuration for 802.1x

Hi,

 

What are the switches you want to use for 802.1x authentication with IC-4000?

Do you have UAC Admin guide?

 

thanks

Manoj

Contributor
Kamran
Posts: 45
Registered: ‎07-01-2008
0

Re: 000 configuration for 802.1x

all switches are 802.1x compliant and i have no admin guide..do u have then plz mail me at rajakamran@hotmail.com

 

Thanks in advance

Trusted Contributor
ManojReddy
Posts: 38
Registered: ‎03-18-2008

Re: 000 configuration for 802.1x

[ Edited ]

Hi,

 

You can get UAC Admin guide from:

 

https://www.juniper.net/customers/csc/documentation/techdocs/enterprise_infranet/2.x/2.1/UACAdminGui...

 

otherwise login as Admin to your IC4000 and then click on 'Help' button which is at top left corner. it opens help pages in a new window. now look at the section "Using the Infranet Controller for 802.1X Network Access".

 

if you still face any problmes in configurations after reading this, please post back with details at what step you are stuck.

 

thanks

Manoj

Message Edited by ManojReddy on 07-02-2008 01:54 PM
Regular Visitor
ohyeh
Posts: 6
Registered: ‎04-24-2008
0

Re: 000 configuration for 802.1x

Hi,I ever have configure ic4500 with Nortel 802.1x switch

 

Authentication

1.configure Authencation Serever ( Local,LDAP,AD etc )

 

Realm and Role

2.configure User Realm to bind to your Authentication Server

3.configure User Role to separate user groups

4.map your user group to any Role at Role mapping

5.enable your Role to be Agent mode

 

dot1x

6.configure Radius group ( group of switch,building floor etc )

7.configure Radius client ( each your dot1x switch ) and map to Radius group

8.configure Radius Attribute ( which Role will got which vlan-id )

 

Radius client

9.configure your dot1x switch to know ic as radius server follow by your switch guide

 

OAC

10.install OAC on your PC

11.create profile,select log in method ( should be use "prompt log in name and password" ),disable "validate server certificate"

12.select your wire adapter to be operate by OAC

13.bind your profile to your adapter

14.try to log in with username and password on you Authentication Server,you will got right vlan depend on user

 

Please use those steps be your guide,I'm not sure I'm forgot somethings or not.

 

Regards.

Ohyeh.

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.