Identity and Policy Control
Reply
Visitor
mhaiderali@live.com
Posts: 2
Registered: ‎06-30-2012
0

You are being logged in with the temporary profile

Hello Group,

I am stuck in a problem in IC4500. I am using Layer-2 and Layer-3 enforcement and its working fine. with this feature i am using the roaming profile. but when the system boot up and i provide the user credentials, it showz an error msg that " you are being logged in with the temporary profile".

Have any1 seen this issue before ? and found the root cause for this please?

 

 

Visitor
mhaiderali@live.com
Posts: 2
Registered: ‎06-30-2012
0

Re: You are being logged in with the temporary profile

I am using Windows7, with IC-4500 with 4.1 version.

 

Super Contributor
apaul
Posts: 160
Registered: ‎11-06-2009
0

Re: You are being logged in with the temporary profile

What's the client ? is it ODY or Pulse ?

Have you configured machine authentication ?

Ashish Paul
Visitor
Muhammad Haider Ali
Posts: 1
Registered: ‎07-09-2012
0

Re: You are being logged in with the temporary profile

Hello,

I have configured machine authentication for the client end station. after sucessfull machine auth the client end station goes for Layer-2 and layer-3 enforcement. sometimes the user gets thier normal profile loaded on the end station but sometimes they get the error of "users have been logged with the temporary profile". i have consulted juniper regarding this, and they said as per the flow chart, after sucessfull machine auth, layer-2 and layer-3 enforcement, client end station tries to contact the AD server directly without sending the request through the IC and in response, AD Server response back directly. so i believe this is an issue with the end user network.

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.