Junos产品讨论区
回复
Visitor
sidwei
发帖数: 3
注册日期: ‎04-18-2011
0

SSG5-SB 再CONSOLE下连接MODEM后起不来

在Version 6.2.0r5.0 下,SSG5-SB和SSG5-SH的防火墙console口接远程

维护modem时,断电重启防火墙后,不能启动,需要断开连接modem的线或
拨号进入敲几下回车,加载才能继续,有没有人碰到过这样的情况。

get system

Product Name: SSG5-Serial
Serial Number: 0162112010001481, Control Number: 00000000
Hardware Version: 0710(0)-(00), FPGA checksum: 00000000, VLAN1 IP (0.0.0.0)
Flash Type: Samsung
Software Version: 6.2.0r5.0, Type: Firewall+VPN
Feature: AV-K
Compiled by build_master at: Thu Jan 28 11:42:26 PST 2010
Base Mac: 28c0.dad8.a980
File Name: ssg5ssg20.6.2.0r5.0, Checksum: 23364b4e
, Total Memory: 128MB

Date 05/21/2001 08:52:28, Daylight Saving Time enabled
The Network Time Protocol is Disabled
Up 0 hours 4 minutes 34 seconds Since 21May2001:08:47:54
Total Device Resets: 0

System in NAT/route mode.

Use interface IP, Config Port: 80
Manager IP enforced: False
Manager IPs: 2

 
New User
lanshiyun
发帖数: 1
注册日期: ‎03-23-2011
0

回复: SSG5-SB 再CONSOLE下连接MODEM后起不来

我也曾经遇到过同样的问题,最后是更换NOS版本后解决。

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.