Good morning all,
I was hoping someone might be able to help where the IOS->JunOS migration tool has failed.
We have an old Cisco 2600 with an MFR configuration, we would like to convert for use in an SRX220 Router.
IOS config
controller T1 0/0
framing esf
clock source line primary
linecode b8zs
channel-group 0 timeslots 1-24 speed 64
!
controller T1 0/1
framing esf
linecode b8zs
channel-group 0 timeslots 1-24 speed 64
!
!
!
!
!
!
interface MFR0
description 44.YHFP.000289
no ip address
no ip route-cache cef
frame-relay multilink bid test
frame-relay lmi-type ansi
!
interface MFR0.16 point-to-point
description WAN to SBC Internet Service
ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
no cdp enable
frame-relay interface-dlci 16 IETF
Many Thanks,
Shaun
