J-Series Router Reverse SSH/Telnet Session via Console / AUX

[darkstar02]

Hi Community,

we want to configure OOB Access between two J-Series routers connecting the AUX Port from router one to the Console Port of router two and vice versa.

The document describes a "Rollover Cable" for this function.

Does anybody knows how this cable needs the PIN layout. Is this a simple crossover cable ?

Many thanks for your help

[aarseniev]

Hello,

This is flat 8-wire cable with RJ45 connectors on each end

http://en.wikipedia.org/wiki/Rollover_cable

It is also known as "Cisco blue rolled console cable"

http://www.cisco.com/en/US/products/hw/routers/ps332/products_tech_note09186a0080094ce6.shtml#topic8

HTH

Regards

Alex