SNMP oids for Junos-ES chassis cluster

[1994]

On a J-series  (J2350) using 9.5R1.8 I used this OID to get CPU information

.1.3.6.1.4.1.2636.3.1.13.1.8.9.1.0.0

 After enabling chassis clustering, it no longer works. Nothing under .1.3.6.1.4.1.2636.3.1 works at all, in fact. The mib is browsable here:

http://www.oidview.com/mibs/2636/JUNIPER-MIB.html

And it contains all important info about cpu, memory, and other system information. I spent a few hours going through the mibs:

https://www.juniper.net/techpubs/en_US/junos9.5/information-products/topic-collections/config-guide-network-mgm/juniper-specific-mibs-junos-nm.html

and do not see any alternate mib. SNMP works, I can still poll interfaces, but I will need a way to get cpu/memory information via snmp polling.

[rkim]

I think this should work. At one point jnxOperatingCPU OID was not supported in chassis cluster mode. But that should be supported by 9.5R1. I would recommend opening a case with JTAC and have them investigate this.

-Richard

[1994]

Just to follow up in case anyone else runs into this, I did open a case and it appears to be an issue with this release on the J-series chassis. Apparently the same release for an SRX chassis works fine. So, known bug for now.

[rkim]

Actually I found out that this is supported on SRX. But for J-Series this required an enhancement request. There is already an ER opened for this and is currently under review. So this should be included in a future JUNOS release TBD.

-Richard

Message Edited by rkim on 05-19-2009 10:36 PM

[andydouth]

Hi slightly off topic here but does anybody know where to get a full OID list for Junos or how to convert a MIB into an OID?

 thanks

[mikep]

Hi,

you could use something like that e.g.:

MIB Importer is able to import SNMPv1 and SNMPv2 MIB files. It is fairly easy to convert a MIB file into an OID library:

http://www.fr.paessler.com/tools/mibimporter

Regards

Michael Pergament

[Lili]

Hi, 

Do you know if this issue has been fixed? I run 10.1R2 software on a SRX 650 cluster and nothing under 2636.3.1 works.

Thanks for your help