Hi,
iam trying to configure this card to my J2320 router. i want to set it as E1.
after i slot in the card and online it only show cT1 not ce1.
here are some info:-
JUNOS Software Version 9.0R1.10
FPC 2 REV 07 750-014337 NZ1750 FPC
PIC 0 2x CT1E1 / PRI
FPC 2 REV 07 750-014337 NZ1750 FPC PIC 0 2x CT1E1 / PRI
Slot State
2 Online
show interface terse
ct1-2/0/0 up down
ct1-2/0/1 up down
set interfaces ct1-2/0/0 ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don't inherit configuration data from these groups
> clocking Interface clock source
description Text description of interface
> dialer-options Dialer options
disable Disable this interface
> hold-time Hold time for link up and link down
> isdn-options ISDN interface-specific options
> no-partition Use channelizable interface as clear channel
no-traps Don't enable SNMP notifications on state changes
> partition Channelized interface partition
per-unit-scheduler Enable subunit queuing on Frame Relay or VLAN IQ interfac
e
> t1-options T1 interface-specific options
> traceoptions Interface trace options
traps Enable SNMP notifications on state changes
have anyone try to configure it as E1..please do let me know how to change it.
Thank you.
Regards,
chenoi