Dear Dclarkjr1122,
I did what you had instructed me, but that did not help me.
I am not sure what was wrong with my SSH access but it was not until I confirmed one more time interface ge-0/0/0 (not ge-0/0/0.0) under security zone settings and allowed SSH ver 1, that I managed to SSH successfully.
ersion 9.3R4.4;
system {
host-name cslab-j2320;
domain-name cslab.hr;
root-authentication {
encrypted-password "$1$.urQQgr3$uMcCLbIOrpSpfMnP.k..Y/";
}
name-server {
192.168.0.11;
}
login {
user nsm_admin {
uid 2003;
class super-user;
authentication {
ssh-rsa "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAuZ4oEW/5qOEvejpr9JNqNTUqkYGfUVnRHU/fRQF/VwwGw9FIcaQYAOTjaRTag4TOKllrrsyip7D+B+zpYBhUbrixXp59NYm119+11bKIR4RcDLBrspKMX3sGNFDYvej8i283uWewVJC7v+yIeVa82oNOnL+gTbtbBknaBmFZ4t38sHsWlPTUEd/xFhCdo2Lka/iRQ/4gicEpKCZmHb6GMsJdYrsx3nkKCN7ggjv1Ojq47/x+Mt+KcVlP7ZHtsaOuGHBUHhsfonoDFr/veLLwibTZP1uH2B6Yfiq54Jbd6ZhXmz0CPHO3dXi/hj3Qf+ZiXkTCGpcZbEj39KvkeLShpQ== nsm_admin@nsm";
}
}
user web_admin {
uid 2001;
class super-user;
authentication {
encrypted-password "$1$IkzqoM2o$1zst3l8ksN2gNvI79wMSc.";
}
}
}
services {
ftp {
connection-limit 10;
rate-limit 4;
}
ssh {
root-login allow;
protocol-version [ v2 v1 ];
connection-limit 10;
rate-limit 4;
}
telnet;
netconf {
ssh;
}
web-management {
http;
}
}
}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 192.168.2.57/24;
}
}
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop 192.168.2.1;
}
}
security {
zones {
security-zone trust {
host-inbound-traffic {
system-services {
telnet;
ssh;
http;
ping;
}
}
interfaces { ge-0/0/0.0;
}
}
}
}
#####
UPDATE: I found out that my router does not support SSH ver 2 and it only works when I set ver1. (ver 9.3R4.4 world-wide download packet)
Just, a a question more - does Junos 9.3 support 3DES for SSH at all?!
Regards,
Jure