Junos
Reply
Contributor
juniper321
Posts: 75
Registered: ‎11-08-2011
0

HELP --i was doing config private and my connection dropped

Is there a way to get back my session. i logged back in with the same username and i see that my session is still there

 

admin@ljaco-srx-vip> configure      
warning: Clustering enabled; using private edit
warning: uncommitted changes will be discarded on exit
Entering configuration mode
Users currently editing the configuration:
  admin terminal p1 (pid 55661) on since 2011-12-19 21:43:26 UTC, idle 00:41:46
      private [edit]

 

is there a way to get back to my original session or get the config back that wasn't committed yet?

 

TIA

Recognized Expert
erdems
Posts: 192
Registered: ‎12-30-2008
0

Re: HELP --i was doing config private and my connection dropped

 

Hello,

 

 I don't think you can recover the changes made by a lost configure private connection, at least in a human-readable way.

 

 configure private uses a private copy of juniper.data file instead of the shared candidate config (juniper.db) and is stored in /var/rundb/private until the user does commit. (This is one of the reasons why you can't go into configure mode while someone else is using configure private.)

 

 The temporary file in /var/rundb/private is stored as a binary data and not plain text, hence my doubts.

 

 I would recommend disconnecting the stuck session using request system logout terminal <terminal-name> and start from scratch.

 

 Thanks,

____________________________________________
If you think your question's answered, please
mark the respective post as "Accepted Solution".

Kudos are an excellent way of showing appreciation, too.
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.