Junos
Reply
Visitor
swilliams@cnc-usa.com
Posts: 1
Registered: ‎05-17-2011
0

IOS MFR to JunOS MLFR

Good morning all,

 

I was hoping someone might be able to help where the IOS->JunOS migration tool has failed.

 

We have an old Cisco 2600 with an MFR configuration, we would like to convert for use in an SRX220 Router. 

 

IOS config

 

controller T1 0/0
 framing esf
 clock source line primary
 linecode b8zs
 channel-group 0 timeslots 1-24 speed 64
!
controller T1 0/1
 framing esf
 linecode b8zs
 channel-group 0 timeslots 1-24 speed 64
!
!
!
!
!
!
interface MFR0
 description 44.YHFP.000289
 no ip address
 no ip route-cache cef
 frame-relay multilink bid test
 frame-relay lmi-type ansi
!
interface MFR0.16 point-to-point
 description WAN to SBC Internet Service
 ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
 no cdp enable
 frame-relay interface-dlci 16 IETF

 

Many Thanks,

 

Shaun

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.