Good morning all,
I was hoping someone might be able to help where the IOS->JunOS migration tool has failed.
We have an old Cisco 2600 with an MFR configuration, we would like to convert for use in an SRX220 Router.
controller T1 0/0 framing esf clock source line primary linecode b8zs channel-group 0 timeslots 1-24 speed 64!controller T1 0/1 framing esf linecode b8zs channel-group 0 timeslots 1-24 speed 64!!!!!!interface MFR0 description 44.YHFP.000289 no ip address no ip route-cache cef frame-relay multilink bid test frame-relay lmi-type ansi!interface MFR0.16 point-to-point description WAN to SBC Internet Service ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx no cdp enable frame-relay interface-dlci 16 IETF
© 1999 - 2016 Juniper Networks, Inc. All rights