Junos OS

last person joined: 6 days ago 

Ask questions and share experiences about Junos OS.

  • 1.  IP PIM STATE REFRESH message

    Posted 07-09-2017 15:46

    Hi evrybody,

     

    Is IP PIM state refresh i on by default on MX5 platforms?  I could not find any DOCS.

     

    Thanks



  • 2.  RE: IP PIM STATE REFRESH message
    Best Answer

    Posted 07-10-2017 02:41

    Hi,

    The below document says Juniper does not support it:

    V2 State Refresh:
    PIM version 2 control messages related to PIM dense mode (PIM-DM) state refresh.
    State refresh is an extension to PIM-DM. It not supported in Junos OS.



    https://www.juniper.net/documentation/en_US/junos/topics/reference/command-summary/show-pim-statistics.html


    Also I do not see the below draft in the Juniper supported standard list:
    https://tools.ietf.org/id/draft-ietf-pim-refresh-00.txt

     


    Supported IP Multicast Protocol Standards on Juniper:
    https://www.juniper.net/documentation/en_US/junos12.3/topics/reference/standards/multicast-ip.html



    Regards,
    Rahul

    Please mark my solution as accepted if it helped.



  • 3.  RE: IP PIM STATE REFRESH message

    Posted 07-11-2017 19:16

    Thanks Rahul!!