Junos
Reply
Contributor
badar28
Posts: 76
Registered: ‎06-12-2008
0

IPSEC redundancy on M7i router

Hi all,

 

i have two M7i router with AS PIC and i want to make two IPSEC vpn between them, i want to make one IPSEC vpn active at one time and when first IPSEC tunnel goes down then 2nd tunnel automatically come up.

In Netscreen, we achieve this funcationality by using TRACK-IP option but how can we achieve this active backup scenario or redundancy in 2xM7i routers with AS PIC. How to monitor or tack-ip in M7i.

 

Thanks and Regards,

Recognized Expert
benb
Posts: 205
Registered: ‎11-05-2007
0

Re: IPSEC redundancy on M7i router

Configuration a backup remote-gateway and using dead peer detection (DPD) might be what you need?

 

http://www.juniper.net/techpubs/software/junos/junos92/swconfig-services/configuringthe-remote-address-and-backup-remote-address.html#id-12146532

 

 

 

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.