Junos
Reply
Visitor
Tulli
Posts: 4
Registered: ‎05-29-2009
0

Is BFD supported on all Juniper router running JUNOS?

Hi,

maybe stupid, but I did not found any info about it.

 

Is BFD with static routing or Multihop-BFD supported on all Juniper devices like also the smallest J-series-router or the SRX100 ? 

 

Thanks

Tulli

Distinguished Expert
Raheel
Posts: 414
Registered: ‎06-18-2008
0

Re: Is BFD supported on all Juniper router running JUNOS?

By default, BFD is supported on single-hop static routes. Beginning with JUNOS Release 8.2, BFD also supports multihop static routes.

 

thanks

raheel anwar

 

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
New User
berger
Posts: 1
Registered: ‎11-02-2009
0

Re: Is BFD supported on all Juniper router running JUNOS?

Hi Raheel,

so you say BFD is supported by all devices (and there fore including the SRX 100) running Junos 8.2 or higher?

Is the actual version like 9.2 capable of doing BFD over multihob static routes? Yes or No.

 

Thanks in advance

 

berger

Distinguished Expert
Raheel
Posts: 414
Registered: ‎06-18-2008

Re: Is BFD supported on all Juniper router running JUNOS?

correction, on SRX branch it start supporting from 9.5 onwards.

 

thanks

raheel anwar

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.