Junos OS

last person joined: yesterday 

Ask questions and share experiences about Junos OS.

  • 1.  J-flow not working after upgrade from 9.6 to 10.0 (J-series)

    Posted 08-31-2010 07:04

    Hi,
    Anyone faced this issue before? After upgrade from junos 9.6 to 10.0R3, j-flow stopped working.

    Find below configuration for j-flow that was working before the upgrade.

     

    set interfaces ge-0/0/0 unit 0 family inet filter input sample-in
    set interfaces ge-0/0/0 unit 0 family inet filter output sample-in
    set interfaces ge-0/0/0 unit 0 family inet address 160.160.1.152/24

     

    set forwarding-options sampling input rate 1
    set forwarding-options sampling input run-length 9
    set forwarding-options sampling family inet output flow-server 160.160.1.120 port 2055
    set forwarding-options sampling family inet output flow-server 160.160.1.120 local-dump
    set forwarding-options sampling family inet output flow-server 160.160.1.120 version 5

     

    set firewall family inet filter sample-in term default then sample
    set firewall family inet filter sample-in term default then accept

     

    If anyone got working configuration for j-flow in release 10.0, please assist

    Regards,

    Haze

     

     

     



  • 2.  RE: J-flow not working after upgrade from 9.6 to 10.0 (J-series)
    Best Answer

    Posted 09-01-2010 21:26

    Issue resolved.

    J-flow is not working or having some issue in 10.0R3 which i was trying initially.

    But it is working in 10.0R4