Hello all,
I have a J2300 that I attempted an upgrade on. I have followed the recovery instructions below:
Download install media
Unzip the file
dd if=installmedia of=/dev/device
When complete, I get confirmation that 256mb were written to disk, but when I place the CF back in the router, I get
Attempt to boot from primary flash recovery partition
Attempt to boot from primary flash
After sitting there for a bit, the router reboots and goes through the process again. I have a 256mb CF, so I used the 256mb install media for 9.6r1.13
I have also tried using a 512mb usb drive to no avail.
One question I have on the 512mb USB, does that require a 512mb install media?
Also, do I need to somehow also load a junos file on the flash drive?
Thanks
Travis