Junos
Reply
Visitor
duron
Posts: 7
Registered: ‎01-25-2010
0
Accepted Solution

J2320 and traffic monitor

Hello. I'm new in Junos and Juniper, and I have question, how to enable traffic monitor via jweb in Monitor->Reports->Traffic? It show only zeros. :smileysad:

Distinguished Expert
lyndidon
Posts: 1,330
Registered: ‎06-06-2011
0

Re: J2320 and traffic monitor

To use J-Web packet capture:
    Select Troubleshoot>Packet Capture.
    Enter information into the Packet Capture.
    To save the captured packets to a file, or specify other advanced options, click the expand icon next to Advanced options,
    Click Start.

Capturing and Viewing Packets with the J-Web Interface
http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-admin-guid...

Hope this helps

[Click the "Star" for Kudos if you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
Distinguished Expert
lyndidon
Posts: 1,330
Registered: ‎06-06-2011
0

Re: J2320 and traffic monitor

Seems like you were just trying to view reports as opposed to capturing traffic. The J-Web can be a little daunting trying to find things just by looking around. You may want to grab the guide and save it, then  search for topics in it, If you don't find what you are looking for, or you don't understand it, then here would be a good place to continue.

[Click the "Star" for Kudos if you think I earned it!
If this solution worked for you please flag my post as an "Accepted Solution" so others can benefit..]
Visitor
duron
Posts: 7
Registered: ‎01-25-2010
0

Re: J2320 and traffic monitor

No, it's a not traffic capture,it's a traffic monitor, and I don't know how to enable it.

 

Visitor
duron
Posts: 7
Registered: ‎01-25-2010
0

Re: J2320 and traffic monitor

Simlpe, all I need, it's a configure what to log and count in policies, something like this:

 

    policies {
        from-zone local to-zone vpn {
            policy to_vpn {
                match {
                    source-address any;
                    destination-address any;
                    application any;
                }
                then {
                    permit;
                    log {
                        session-init;
                        session-close;
                    }
                    count {
                        alarm per-second-threshold 1 per-minute-threshold 4;
                    }
                }
            }
        }

    }

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.