09-12-2009 08:56 PM
I am little new to JUNOS and trying to understand logical-router or logical-system configuration. I guess logical-router and logical-system both are the same thing right? How can i enter into logica-router or logical-system so i can do continuous configuration for that logical-router/system rathar than configuring logical-route/system parameters by puting logical-system or logical-router key workd in each and every command. as well as what are the other limitation will i have in terms of bulind up testing lab with the help of logical-router in one or two j-series or m-series routers?
09-13-2009 01:31 AM
Beginning from JUNOS 9.3, logical-routers feature have been renamed to logical-systems:
In ordre to restrict user rights to configure a particular logical-system only (and not have access to global configuration) you have to define logical-system admins/users:
Once defined, these admins/users will be able to configure their logical-system only when logged in, without prefixing config line with "logical-system blah"
Is that what you are asking?
Accept as Solution = cool !
Accept as Solution+Kudo = You are a Star !
09-13-2009 09:27 AM
I was looking for how can i enter into particular logical-system configration mode and can configure things which is related to that logical-system only so I dont have to use logical-system keyword in each and every command when doing configuration from defalut logical-system configuration mode. As well as I also want to know how logical routers are connected with each other with in one physical router? I have setup two locial-systems and link beetwnen them is showing down/up status so how can i make interface administratively in up/up mode in order to make communication between logical-systems.
09-14-2009 02:17 PM
Once in edit mode, the operator can do 'edit logical-system <logical-system-name>'. After that, you will notice your prompt change, such that your context is now at the level of that logical-system. From there, configure changes will be made to that hierarchy.
If you have physical connections (fiber/cable) between interface in two different logical-systems, you configure the physical properties of the interfaces in the master instance. And, the logical interface bits go in the respective logical-system configuration.
If you don't have a physical connection. You will need to install a services PIC, and use lt- (logical-tunnel) interfaces.