Junos
Reply
MSC
Contributor
MSC
Posts: 35
Registered: ‎01-19-2012
0

Junos NAT configuration

Hello Guys,

I need help to translate the following Cisco command into Juos,

 

ip nat inside source static tcp 10.x.x.1 2222 212.x.x.x  2222 extendable

 

Tthanks in advance

Super Contributor
jwparks
Posts: 157
Registered: ‎04-20-2009
0

Re: Junos NAT configuration

It's not that straightforward unfortunately.  It takes a bit of configuration.  Is this for an SRX or M/T/MX?

 

Start here for M/T/MX:

http://www.juniper.net/techpubs/en_US/junos10.4/information-products/pathway-pages/services-interfac...

Visitor
thassan
Posts: 2
Registered: ‎02-18-2011
0

Re: Junos NAT configuration

Have a look at this KB article for NAT on the SRX:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB21922

 

MSC
Contributor
MSC
Posts: 35
Registered: ‎01-19-2012
0

Re: Junos NAT configuration

Thanks for the reply. It is for the SRX platform

Copyright© 1999-2013 Juniper Networks, Inc. All rights reserved.