Hi all,
I have a Juniper SRX100 which I purchased used for studying purposes. I can't seem to connect to the device via SSH or IE.
1) SRX100
2) Windows laptop running Windows 7
3) Putty client
4) Connected from the laptop to the SRX via a USB to Serial Console Rollover Cable
5) Cable plugged into port #3
6) Disabled my wireless NIC so that there are no conflicts with ip addressing
7) When I do an IPCONFIG -> the only IP address that shows up is 192.168.94.1 / 192.168.198.1 (both for my VMnet)
😎 If I enable my wireless and do an IPCONFIG -> I get an IP address that is assigned to my cable provider
9) Can't ping 192.168.1.1 / Can't manage the device via the web gui
10) Link lights show no activity (regardless of port that I'm plugged in to)
What am I doing wrong?Hopefully I've provided enough information.