Hi Experts,
I have a requirement to police the following traffic flows to 10M.
TCP port 1719 & HTTP
UDP 1720
The total of the above should be policed to 10M.
Filter shouldn't match other traffic ( EX TCP1720 , UDP 1719 )
If I configure something like the following, this will include TCP1720 & UDP 1719
But I need to match and police only
TCP port 1719 & HTTP
UDP 1720
[edit firewall family inet]
+ filter TRAFF-POLICING {
+ term 1 {
+ from {
+ protocol [ tcp udp ];
+ destination-port [ http 1719 1720 ];
+ }
+ then policer po-1s6-10m;
+ }
+ term 2 {
+ then accept;
+ }
+ }
Any suggestions?
Regards,
Moses N