Hello,
this is my first post in the forum and I'm new to Juniper so I hopen I don't ask something trivial. I'm trying to restrict the telnet access to my router Juniper M7i with Junos 8.0R2.8 only from my secure network. I have found some documentation in the network and applied the following configuration:
root@router# show firewall family inet filter local_acl
term terminal_access {
from {
address {
X.X.X.X/26;
}
protocol tcp;
destination-port 23;
}
then accept;
}
term terminal_access_denied {
from {
address {
0.0.0.0/0;
}
protocol tcp;
destination-port 23;
}
then {
reject;
}
}
term default-term {
then accept;
}
root@router# show interfaces lo0
unit 0 {
family inet {
filter {
input local_acl;
}
address 127.0.0.1/32;
}
}
But I can access from any IP address to the telnet service, so this doesn't work and I don't know what is the problem. Am I doing something bad? Thanks in advance,
Christian